Month: November 2012

Britain’s best high streets

by
Sowerby Bridge Rushbearing 2012

It’s not a paper that I would choose to read, but in the Daily Express last week was an article entitled ‘Britain’s best high streets‘, and, pleasingly, it mentioned Wharf Street in my adopted home town of Sowerby Bridge – pictured above during the Rushbearing festival.

Now, since it only features three towns, it’s not exactly an authoritative article and I’m sure there are many better high streets out there. But Wharf Street is pretty good as high streets go – we have an independent bakery, grocer, butchers, a post office, two banks and a wide range of specialist and boutique shops. There’s also a number of restaurants, including two good curry houses, and a bistro which is listed in the Good Food Guide. And there’s a market which is open most days of the week.

Sowerby Bridge’s high street has held up against two supermarkets. Lidl is just up the hill, and there’s a reasonably-sized Tesco at the western end of the town. It’s probably because the independent shops here tend to offer services that are better than, or different to, what the supermarkets can provide.

It’s not perfect though. Three of the pubs on Wharf Street are currently shut – two have closed recently and one has been shut for some time. And with it being the main road between Halifax and Rochdale it is very busy with traffic, making it a rather noisy place to be with rather narrow pavements. However, the variety and quality of shops is one of the things that drew us to the town and, two years after moving here, we’re still generally in love with the place.

Printer sharing with VirtualBox on a Mac

by

This blog post will probably be only be useful to a small niche. If you have a Mac, with a printer, and run Windows in VirtualBox, here’s what you need to do to get it to work.

Step 1: Make sure your printer is shared on the network

On your Mac, open System Preferences, choose Print & Scan, and then select your device on the list on the left. Tick ‘Share this printer on the network’.

Step 2: Check network settings for your virtual machine

In the VirtualBox manager, open your Windows virtual machine’s settings, and under Network, ensure you’re using ‘Bridged Adaptor’ rather than ‘NAT’. This will make your life much, much easier later on.

Step 3: Install and set up your printer using Bonjour

Bonjour ships on all Macs, but not on Windows, which is a shame because it makes setting up network connections much easier. Thankfully, Apple offers a cut-down version for Windows computers, so download Bonjour Print Services for Windows, and install it. This will add a ‘Bonjour Printer Wizard’ icon to your desktop.

Run the Bonjour Printer Wizard. If you’ve done the first two steps correctly, your printer should be listed. Click Next, and, if you’re lucky, Bonjour will install the correct driver and add the printer to Windows for you. Sorted. If not, then…

Step 4: Install the printer driver in Windows

Sometimes Bonjour won’t be able to identify which printer driver you need and will ask you to select it. Again, if you’re lucky, your printer will be one of those that Windows ships with, but if not, you may reach an impasse here. Some people have had luck with using a driver that is similar to their printer, but this doesn’t always work.

Instead, we’ll connect the printer directly to Windows to convince it to install the driver that way. VirtualBox lets you bridge any USB device which is plugged into your Mac, so that the virtual machine can see it. Turn your printer on, and then whilst Windows is running, click on the Devices menu in VirtualBox, select USB devices, and then choose your printer. Windows should detect that the printer is now ‘plugged in’, and so it will install the necessary drivers. Complete the installation, disconnect your printer using VirtualBox and then shut down both your virtual machine, and your Mac, to ensure that your printer is correctly picked up by your Mac on the next boot.

Start your Mac again, and then open Windows in VirtualBox, and try to run the Bonjour Printer Wizard again. Hopefully, this time you’ll be able to select your printer driver from the lists when presented (annoyingly it’s not searchable).

This still didn’t work for my printer, so I had to do one final trick. I clicked ‘Have Disk’, and then browsed to the c:\Windows\System32\DriverStore\FileRepository folder, then sorted the sub-folders by date. My printer is by HP, and one of the newly-created gobbledegook folders had ‘HP’ in the title which turned out to be my printer. I selected this, and was finally able to get the printer working, with the above test page as proof.

Why not just connect the printer directly?

In step 4, I mentioned you can simply connect your printer directly to the virtual machine, thus avoiding the dilly-dallying around with Bonjour. This works, but it’s flaky; once you’ve connected your printer to Windows, you may need to reboot your Mac before any Mac applications can print to it. Whilst setting up Bonjour is more effort initially, once it’s done, you should find it easier to work with.

If anyone’s interested, I went through all of this because I wanted to print out a coupon for a free one litre carton of grape juice and couldn’t get the Coupon Printer to work correctly on my Mac.

Blood donation

by
I donated blood for the first time today.

On Tuesday, I donated a pint of blood, for the first time.

It’s been something that I’ve been meaning to do for quite some time. I’m already an organ donor (I carry a card around which shows that I give consent for my organs to be used in transplants after my death), but until now I’ve never given blood.

I couldn’t donate throughout much of 2007 and 2008, as I had been on high-strength steroid tablets due to flare-ups with my asthma and my overnight stay in hospital in November 2007. But although I’ve been okay since then, I admit that I’ve simply never got around to it, even when there have been donation sessions at work.

My big worry was that it would hurt. And it did – a bit. For me the worst bit was the needle being inserted at the start; the pain was similar to when I’ve had vaccinations but lasted a little longer. However, once it was in, it was okay – a little uncomfortable, but not painful, and it was done after around 10-15 minutes. All in all, I was there for about an hour, due to me being a new donor and needing a slightly longer medical check first.

Afterwards, the site where the needle went in was a little tender for a few hours, but I didn’t receive any bruising and there was just a small red dot when I took the bandage off.

I’ve already booked another appointment, for mid-March next year, to donate my second pint. If you want to give blood, you can find details at blood.org.uk – the NHS needs a constant supply of blood and so if you are healthy and can spare the time I’d urge you to do it.