The Black Country Living Museum

A photo of a street scene inside the Black Country Living Museum in Dudley

Following our trip to Dudley Zoo and Castle, we went to the other major tourist attraction in Dudley: the Black Country Living Museum.

Those of us living in the North of England may be familiar with Beamish, which is a large, outdoor museum showing what life was like in the North East during various time periods. The Black Country Living Museum is very similar, but based in the Black Country. This is the area around Dudley, Sandwell, Walsall and Wolverhampton in the West Midlands, and probably gets its name from the mining and/or burning of coal.

Visitors can walk around various buildings that have been transplanted or recreated from the area. These include an array of shops – some of which sell things to buy – as well as a couple of pubs and fish and chip shops. There’s also a school where you can have a ‘lesson’ as if it were the 1950s, and a fairground. The museum also backs onto the Dudley Canal, and a cut from the canal goes through the museum.

Trolleybus

Transport

It’s quite a large site, and so there are transport options to get you from the visitor centre at the entrance into the recreated town. On the day we went, this was a classic diesel bus, but there’s also an electrically-powered trolleybus that was parked up. There’s a tram line as well, but this is currently out of use.

Mines

As mentioned, coal probably inspired the name of the Black Country, and so there are two mines on site. One is a deep mine, The Racecourse Colliery, and the other is a ‘drift mine’ which can be entered on foot. The latter is open for tours, although it’s a realistic simulation rather than a real mine. It does mean that it’s unlikely to collapse, but you’ll need to wear a hard hat as it includes low ceilings that would be typical in this type of mine.

There’s plenty to see, and I would advise going at a weekend when more events take place as we did. Like many attractions, your tickets are valid for one year after your visit, so we may go back another time to see some of the other demonstrations. As you would expect, the museum is also frequently used for filming shows such as Peaky Blinders.

As usual, you can view several more photos on Flickr.

Accessibility

The site is on a slope, and some powered wheelchairs may struggle in some places. Some buildings have narrow entranceways or steps, and the drift mine is uneven under foot. There is an accessible bus available if booked in advance. Some of the industrial exhibits may produce loud and unexpected noises.

ThermoPro TP357 Bluetooth thermometer review

A photo of a ThermoPro TP357 thermometer showing the current temperature of 17.5℃ and humidity of 59% on a LCD display.

I have an upcoming project for Home Assistant which means that I need to be able to measure the temperature in our bedroom. As part of this, I’ve bought a couple of ThermoPro TP357 Bluetooth thermometers from Amazon (sponsored link). One is for our bedroom, and the other is for our eight-year-old’s bedroom which tends to get a bit cold in winter.

I specifically went for these thermometers because they’re:

  • Cheap – I paid £19 for the pair last week, but they’re £16 for the pair as I write this.
  • Supported by Home Assistantthere’s an official integration.
  • No extra hardware required – because they’re Bluetooth, and I run Home Assistant on a Raspberry Pi with a supported Bluetooth chip, there’s no additional hardware required to get the two to talk to each other.
  • Probably good battery life – Bluetooth is quite energy efficient when compared with, say, Wifi, and so the batteries should last longer.
  • No need to use the cloud – all the data can be stored locally on Home Assistant.

ThermoPro TP357 look and feel

The ThermoPro units are smaller than I expected. They’re about as tall as a credit card but roughly square, so they’re narrower than a credit card. Each one runs on one AAA battery which is provided. On the back is a flip out kick-stand, a magnet and a hook, so you can wall-mount it, stick it to your fridge or have it free-standing on a shelf like I do. There’s also a button on the back that switches it between Fahrenheit and Celsius.

On the front, there’s an LCD screen which shows the current temperature and humidity level. There’s also a face pictogram – it’ll smile when the humidity is between 30-60%, frown when it’s less than 30% or show a neutral expression if it’s over 60%.

Home Assistant integration

If you have Bluetooth enabled on your Home Assistant device, then a few minutes after you put the battery in, Home Assistant should pop up a notification to say it’s discovered a new ThermoPro device. You’ll just need to confirm that you want to set it up and allocate it to an area, and you’re done.

As you would expect, the ThemoPro integration reveals entities for temperature and humidity, but also the battery level. I’m not sure how accurate this is, as both provided AAA batteries just show 50%. I’ve added these to my Home Assistant dashboard, and have set up some additional functionality that I’ll blog about later. Mainly because, despite allegedly being ‘summer’ in the UK right now, it’s not been warm enough for me to test.

The range seems quite good on these. ThermoPro claim that there’s an 80 metre range in direct line of sight. There’s a few thick walls between my Home Assistant device and the thermostats, and one that is around 5 metres away doesn’t have great signal strength but it’s enough.

ThermoPro app

Of course, ThermoPro expect you to use their app for iOS and Android. This includes logging of up to a year’s data, and you can set notifications based on events related to the humidity and temperature. Well, that’s what it says – I haven’t actually installed the app. I’m not yet sure if it’s possible to have the app and Home Assistant communicate with the thermostat at the same time. But theoretically, anything the app can do, Home Assistant can do too.

Alternatives

I’ve had various Facebook adverts for alternatives to these. Some have e-ink displays, which are more readable at a distance, or use different protocols to Bluetooth. But they’re all more expensive. These two seem to do the job well and are small and cheap. Plus, it should be quite a while until I need to replace the batteries.